Nozzles for a hardware manicure and pedicure: types

• Diamond nozzles. The type of such cutters is the best for manicure. With diamond tips you can implement the correction of artificial nails, work with delicate cuticles and fragile nails, treat acrylics and remove excess pterygium, and effectively build up manicure. Small-diameter cutters can be used to work on the cuticle and lateral rollers. The large-diameter cutters are excellent for removing small calluses, corns and rough skin. There are two types of diamond tips: synthetic and natural diamond. Their difference is that during the procedure, the artificial diamond tip tends to crumble and blunt. The natural diamond is sharper and almost does not crumble.

• Ceramic bits. The ceramic tips are softer than diamond tips, making them perfect for hard nails and rough cuticles, as well as for cleaning calluses and coarse epidermis. The ceramic tips are ideal for removing gel, gel, acrylic and polygel. They can be sterilised in any way, even in autoclaves. After prolonged use, ceramic bits tend to wear out and gradually become smaller. These cutters are considered fragile and therefore must be handled with care, as they can chip off the surface if dropped onto the floor.

• Corundum tips. These tips are designed for natural nails and skin polishing. With a refined action, corundum tips are used in the secondary stages of treatment of the foot skin and natural nails. They are used for the finishing stage (lateral ridges, cuticles). Corundum bits have become the favourites of many nail technicians, because they are easy to use and the end result is undoubtedly good.

• Carbide (metallic) bits - These kinds of bits are best for rough preparations on hard materials. They are good for rough filing, under nail filing, nail length and nail shape correction. Unlike diamond nail files, carbide nail files are considered to be more durable. They are not prone to rusting and withstand sterilisation and disinfection at their best.

• Sand caps are disposable products that are used for pedicures. They can cope with various tasks such as buffing, removing the top layer, correcting the shape, removing corns and calluses, as well as removing cuticles and cleaning the lateral rollers. The caps are put on the rubber base, after which the base is sterilised and the caps are discarded.

• Sanders (rubber, silicone or cloth). They can be used to grind the most sensitive areas in manicures and pedicures.

• Safety tips. Special safety tips are suitable for cleaning the pterygium and gently pushing and pulling the cuticle. The bits are non-abrasive, making them safe for use on nails. The six-faceted cutters are not perishable at all, so they last much longer than diamond cutters. However, when working with these cutters, you must be extremely careful, as mishandling them can lead to injury.

Types of abrasion nozzles for hardware manicure

• Yellow is a very fine nozzle that can be used to work on both skin and natural nails. 
• The white nozzle is considered the most delicate of all. 
• The red one is the small nozzle, which is used to remove cracks and calluses and to treat the lateral rollers. 
• The blue nozzle is medium in size and is used for lifting the cuticle, removing pterygium and treating the lateral rollers. 
• The green nozzle is large and ideal for working on rough skin. 
• The black nozzle is the coarsest coarse nozzle and is only suitable for working on artificial nails.

What are the shapes of tips for a hardware manicure?

• Cone. Designed for sanding and polishing the lateral rollers;
• Cone (reverse). Good for both manicure and pedicure. Designed to work on the free edge of the nail plate and eliminate calluses and laminae;
• A boron. Excellent for polishing the lateral rollers, for pushing back cuticles and for the removal of pterygia;
• Cylinder. Excellent for removing nail varnish, calluses, corns and corns on the feet and for giving nails the proper length and shape;
• Needle. These nail heads are excellent for work in hard-to-reach places. With them it is convenient to clean the joint between the lateral roll and the nail plate;
• Ball. Helps to improve the lateral rollers and prepare the area under the nail after the treatment. The balloon also helps to perfectly correct the shape of the nail plate at the free edge;
• Corn. Suitable for cutting off gel and acrylics, correcting nails and giving the desired shape and length to the nails;

Where to buy Global Fashion manicure and pedicure heads in Romania or in Bucharest?

Насадки для фрезера – это важный инструмент в процессе наращивания ногтей, который широко применяется в маникюрных и педикюрных салонах. На первый взгляд, насадки для фрезера могут показаться похожими друг на друга, однако они различаются по своей форме, размеру и назначению, а также по своей способности выполнять те или иные задачи в работе с ногтевой пластиной.

Каждая насадка предназначена для конкретных процедур, таких как удаление кутикулы, очистка поверхности ногтя, обработка подушечек пальцев или удаление гелевого покрытия. В процессе наращивания ногтей мастер должен выбирать необходимую насадку в зависимости от типа и состояния ногтевой пластины, а также от цели, которую он хочет достичь.

Наиболее распространенными типами насадок для фрезера являются:

1. Конусные насадки используются для удаления кутикулы и удаления корня ногтя. Они могут иметь разный угол наклона конуса в зависимости от задачи.

2. Шариковые насадки применяются для работы с чувствительной кожей на стопе, а также для обработки подушечек пальцев при педикюре.

3. Фрезерные насадки используются для обработки гелевого или акрилового покрытия, а также для удаления кутикулы. Они могут иметь различную степень абразивности в зависимости от материала ногтей.

4. Бусинные насадки используются для обработки ногтя перед наращиванием, чтобы создать гладкую и ровную поверхность. Они также используются для очистки кожи вокруг ногтей.

5. Цилиндрические насадки используются для создания формы ногтей, а также для снятия мертвой кожи на стопе.

При выборе насадки для фрезера мастер должен учитывать не только свои навыки и опыт работы, но и состояние кожи и ногтевой пластины клиента. Некорректное применение насадки может привести к травмам и повреждению ногтей или кожи, поэтому мастер должен быть осторожен и внимателен при работе с инструментом.